How To Break Down A Box Spring. Grab a saw and get ready to break it down. This way, if any pressure or weight is applied to the box spring, it will be directed toward the ground instead of your paint job and windshield wipers.
DIY Why Spend More DIY upholstered box spring from diywhyspendmore.blogspot.com
Remove reinforced corners and the dust cover. Find the center of the box spring, and cut the dust cover with your scissors or knife. Mix warm water and mild detergent in a bucket.
Once The Metal Springs Are Pretty Much Back Into Shape, You Can Work On Shoring Up The Sawed Wood Frame.
Use a screwdriver to remove these pieces and set aside for recycling. Put on a dust mask and wash the box spring free of grease, oils, dirt and other residue. To reduce the risk of injury or aggravation, use caution when using tools such as axes.
Look Out For Any Wood Chips Debris.
Find the center of the box spring, and cut the dust cover with your scissors or knife. Our new home has a staircase very unforgiving to the unbendy box spring. Cut the cord from the mattress’s edges and pull it out.
Screw Those Into The Crosspieces As Well.
Most box springs have plastic pieces stapled onto the corners for added protection. Take your time and go through each spring to make sure you have access to the wood underneath. (see below for a shopping list, tools, and steps.
Use Straight Metal Brackets Screwed Into The Frame.
When moving a box spring upstairs, pick it up from the short (or low) side and go slowly to maintain control of the box spring and avoid damage. Mix warm water and mild detergent in a bucket. Rather than sacrifice a perfectly good box spring for two split box springs (which.
Now It Is Time To Begin Working On The Wood As You Figure Out How To Destroy A Box Spring.
On the opposite side of the mattress, repeat the procedure. Use a hand saw for the wood. Taking apart a mattress and box spring for recycling purposes.
Share
Post a Comment
for "How To Break Down A Box Spring"
Post a Comment for "How To Break Down A Box Spring"